<p>paint construction technology Wood paint construction technology is divided into varnish construction technology and mixed oil construction technology. Varnish construction process, first on the colored oil or toning oil next brush varnish to protect the decorative panels, wood line. If you want to keep the primary colors to brush the varnish, then the material must be cleaned after the purchase of the site and immediately the first time the "cover paint protection." </p>
<p>Mixed oil construction process, the first clean up the wood surface dust and dirt, and then mix the surface with a few pieces of wood, until it is dry with sandpaper light brush the first paint, and point fill the bad, the same to be dry After the sandpaper with light, and then brush the second paint, to be dry after repeated use of sandpaper lighting procedures, brush the third time at this time paint. In general, the mixed oil to two to three times is appropriate Third, </p>
<p>the wood construction Note 1, wood paint should be completed after the ground construction brush, the construction to maintain ventilation, no dust, so as not to affect the overall effect, wood paint and latex paint can not be the same time construction. 2, the wood to be dry, the moisture content of not more than 15%, the construction environment humidity and temperature should not be too high 3, paint products for the three components (the main paint, thinner, </p>
<p><br />
<br />
</p>
