<P>April 5, the Beijing Municipal Trade and Industry Bureau of the market sales of furniture products for sample testing, the results show that children's furniture more than half of the unqualified, a number of well-known brands are on the black list, sampling substandard projects focused on structural safety and Warning signs. And in March the Shanghai Trade and Industry Bureau announced the children's furniture substandard projects are mainly concentrated in the structural safety and warning signs in two ways. These two indicators are national mandatory standards, are important safety performance indicators.</P>
<P>Children's furniture structural safety problems in many aspects, one of the most common is the corner is not rounded, holes and gap card fingers, furniture, 600mm above the fixed, sealed space without ventilation, mechanical performance test is not compliance. Because of the diversity of issues involved in structural safety, the degree of harm to children is not the same, "general conditions" for this series of issues are clearly defined, consumers can also use these details to determine whether children's furniture is safe enough.</P>
<P>"General conditions" stipulates that children's furniture should not be dangerous sharp edges and sharp edges, edges and edges should be rounded or chamfered, and set the radius of the radius or the length of the arc limit, the product from the ground Height outside the 1600mm below the location of the external risk should be rounded, and the radius of the round is not less than 10mm, or the arc length of not less than 15mm; furniture made of rigid material and in the course of the possible damage, The protruding parts that can be touched shall be bent or covered with a protective cap or cover to effectively increase the area that may be in contact with the skin to avoid stabbing or scratching the child.</P>
