by qizhenapp » Wed Jun 14, 2017 1:56 am
<p>How to buy high-quality cabinets which are undoubtedly the cupboard, but how to choose a set of high-quality cabinets but need some expertise to help. In general, the selection of cabinets to start from several places: First, look at sheet metal processing, if the plate is not qualified or equipment is not good there will be eating side of the phenomenon, the future will soon appear in the use of plastic phenomenon.</p><p> Second, look at the edge. The end of the plate should be treated by edge. Professional manufacturers with special machinery Edge. General workshop small factory manual edge treatment is relatively rough. Again, check the drawer, doors and other activities of the hardware components, switches to be flexible, no noise, with or without collision or autism.</p><p> Professional manufacturers to design the cabinet, the cabinet should be between the mountain connection, the overall solid good. Floor cabinet with a horizontal adjustment of the foot, you can adjust the level of the cabinet, there are waterproof function. Should be set to move the whole skirting board, easy to clean the bottom of the cabinet. In addition, the door with a damper to eliminate the noise, the basin below the water tank board, the front of the tank before the ditch, after the drain ditch, etc., will play a decisive role in product life. In the purchase process, should also pay attention to adjust the foot, foot plate combination of use, which is also very important.</p>
