deformation is large, it can not be used in high
Posted: Mon Nov 06, 2017 7:55 am<p>core board, and then press a large core board, so that the plate can be maintained flat. Woodworking Misunderstanding 2: Ignore the fire of wood error consequences: Now many home decoration, a large number of wood products, attention to its decorative and often overlooked its fire. Wood fire point is low, flammable, especially dry wood. Dry days dry, not careful to easily lead to fire, life and property hazards. The correct approach: First, the wood to be </p>
<p>subject to fire treatment, wood fire treatment methods are generally two, one is the fire agent impregnation treatment, the second is the surface coating treatment, this treatment can be carried out in the construction site, in the wood Surface coating on the fire agent; Second, the wood cutting process in the production of attention to fire, construction sites need to stay away from the outlet and open fire place. In addition, the cutting of wood generated by the timely </p>
<p>cleaning, because the wood can easily burn. Woodworking errors: woodworking gap is too large Consequences: carpentry in doing some living time, often there will be a large gap, which are unqualified, not only affect the appearance, but also prone to splicing problems. Correct practice: for wood sealing line, angle line, waist line decorative panels touch joints, etc., for its cracks have certain requirements, such as the general gap can not exceed 0.2 mm, line and line </p>
<p><br />
<br />
</p>
<p>subject to fire treatment, wood fire treatment methods are generally two, one is the fire agent impregnation treatment, the second is the surface coating treatment, this treatment can be carried out in the construction site, in the wood Surface coating on the fire agent; Second, the wood cutting process in the production of attention to fire, construction sites need to stay away from the outlet and open fire place. In addition, the cutting of wood generated by the timely </p>
<p>cleaning, because the wood can easily burn. Woodworking errors: woodworking gap is too large Consequences: carpentry in doing some living time, often there will be a large gap, which are unqualified, not only affect the appearance, but also prone to splicing problems. Correct practice: for wood sealing line, angle line, waist line decorative panels touch joints, etc., for its cracks have certain requirements, such as the general gap can not exceed 0.2 mm, line and line </p>
<p><br />
<br />
</p>