veneer is the most important process of
Posted: Thu Nov 02, 2017 1:24 am<p>drawback is the film soft, slightly bumps prone to white dents. If at least one layer of paint in the paint is PE paint, it will greatly reduce this possibility. PE paint (polyester paint) has the advantage of paint film hard, strong hiding power, transparency, and better performance veneer texture, the disadvantage is difficult to polish, the processing time and effort, the vast majority of manufacturers do not want to use PE coating. This is also able to show the attitude of a </p>
<p>manufacturer to treat the product. Here to explain that the general promotion of Miss training will not be involved in this area, so at this point they will not deceive consumers, they themselves do not understand the difference between these two kinds of paint. Fourth, according to the flatness of 1. veneer blister, indicating veneer in the process of uneven heating, or uneven coating, flat hot press can be calculated to solve the problem of flattened uneven skin. 2. </p>
<p>Wooden surface roughness is not enough, indicating the use of relatively cheap plate, plate flatness is not enough, you can imagine environmental performance is also very difficult to meet the standard, 3. to see whether the process of uniform seepage of the seams are uniform evenly small, this is the root of the car almost, a direct reflection of the level of integrated technology companies. 4. Look at the quality of the finished product package door Although the </p>
<p><br />
<br />
</p>
<p>manufacturer to treat the product. Here to explain that the general promotion of Miss training will not be involved in this area, so at this point they will not deceive consumers, they themselves do not understand the difference between these two kinds of paint. Fourth, according to the flatness of 1. veneer blister, indicating veneer in the process of uneven heating, or uneven coating, flat hot press can be calculated to solve the problem of flattened uneven skin. 2. </p>
<p>Wooden surface roughness is not enough, indicating the use of relatively cheap plate, plate flatness is not enough, you can imagine environmental performance is also very difficult to meet the standard, 3. to see whether the process of uniform seepage of the seams are uniform evenly small, this is the root of the car almost, a direct reflection of the level of integrated technology companies. 4. Look at the quality of the finished product package door Although the </p>
<p><br />
<br />
</p>