science and technology enterprises
Posted: Wed Nov 01, 2017 10:42 am<p>avoid charcoal charcoal). Second, the advantages of wood plastic 1. Solid wood characteristics (1) constitute the main component is wood flour, the content of about 65% - the formation is by solid wood; (2) solid wood texture, color and no color, no scars - see (3) can be implemented solid wood processing technology (planing, sawing, drilling, sticky, nail) - used as solid wood. (2) zero formaldehyde, green environmental protection (formaldehyde emission </p>
<p>�� 0.02mg / L; national standard (GB) ��1mg / L); (3) anti-mildew, anti-corrosion, anti- (5) sound insulation, heat insulation, insulation; (6) a wide range of temperature to adapt, not easy to deformation. (4) flame retardant: combustion materials, flame retardant materials (-45 ~ 65 ��); (2) anti-aging, long service life (outdoor 3 to 5 years without aging; indoor environment for 30 years is not high, low temperature, high strength, high strength (d: 980 ~ </p>
<p>1050Kg / m3) Aging) (factory inspection: 60 �� conditions, 10 hours or less, the diagonal deformation of not more than 2mm qualified products). 4. Surface treatment methods and thermal transfer technology advantages on the market common surface treatment. Paint: directly painted veneer / wood grain paper + paint. Mianqi: PVC coating (adhesive, hot-type); spray paint-free materials; thermal transfer. UV protection does not fade, not aging; rich color, </p>
<p><br />
<br />
</p>
<p>�� 0.02mg / L; national standard (GB) ��1mg / L); (3) anti-mildew, anti-corrosion, anti- (5) sound insulation, heat insulation, insulation; (6) a wide range of temperature to adapt, not easy to deformation. (4) flame retardant: combustion materials, flame retardant materials (-45 ~ 65 ��); (2) anti-aging, long service life (outdoor 3 to 5 years without aging; indoor environment for 30 years is not high, low temperature, high strength, high strength (d: 980 ~ </p>
<p>1050Kg / m3) Aging) (factory inspection: 60 �� conditions, 10 hours or less, the diagonal deformation of not more than 2mm qualified products). 4. Surface treatment methods and thermal transfer technology advantages on the market common surface treatment. Paint: directly painted veneer / wood grain paper + paint. Mianqi: PVC coating (adhesive, hot-type); spray paint-free materials; thermal transfer. UV protection does not fade, not aging; rich color, </p>
<p><br />
<br />
</p>