bottom to standard wooden bars
Posted: Thu Aug 24, 2017 8:02 am<p>on the keel first leveling, straight, according to the panel block size from top to bottom to standard wooden bars, and then in the gap according to the design requirements, the 8 nails keel anyway; wooden wall keel spacing, when no design requirements, generally horizontal keel spacing is 300MM, vertical keel spacing is 400MM. If the panel thickness is above 10MM, the transverse keel spacing can be </p>
<p>enlarged to 40MM; 9, the installation of wooden keel must find square look straight, in addition to set aside a plate thickness, the gap between the pad and wooden skeleton with wood pad, nail, each at least two nails nail nog. &nbsp; &nbsp; two, solid wood panel panel mounted 1. panel whether logs or plywood should be against the selection of colors, patterns of approximation used in the same room; </p>
<p>installation panels, wood should be placed inside the convex ring, adjacent panel wood and the color should be similar. 2. when the cutting plate is slightly larger than the actual size of the keel frame surface net sign, facet plane straight, tree roots downward, the length direction of the need for docking, the pattern should be smooth, the joint position should avoid the sight head, wood panel seam general from the </p>
<p><br />
<br />
</p>
<p>enlarged to 40MM; 9, the installation of wooden keel must find square look straight, in addition to set aside a plate thickness, the gap between the pad and wooden skeleton with wood pad, nail, each at least two nails nail nog. &nbsp; &nbsp; two, solid wood panel panel mounted 1. panel whether logs or plywood should be against the selection of colors, patterns of approximation used in the same room; </p>
<p>installation panels, wood should be placed inside the convex ring, adjacent panel wood and the color should be similar. 2. when the cutting plate is slightly larger than the actual size of the keel frame surface net sign, facet plane straight, tree roots downward, the length direction of the need for docking, the pattern should be smooth, the joint position should avoid the sight head, wood panel seam general from the </p>
<p><br />
<br />
</p>