decoration network.Want to install
Posted: Wed May 24, 2017 3:59 am<p>installation of steel doors and acceptance. First, the measurement of the door and the door is suitable for &nbsp; measuring the thickness of the wall, the width and height of the door, and then measured the length of the door frame and the frame length, to see if the door is suitable. The 1 door assembly &nbsp; three door frame in the same plane, the top frame and the frame are connected into a 90 degree </p>
<p>angle, on both sides of the frame fixed 4 to 6 connecting sheets, strips and lock locked nail foot angle batten, top frame cover on both sides of the above, in the width of the two door should be 7mm frame than the width of the door, the door between the top frame and the inner gear ground height should be 13mm high fan gate. 2 installation frame &nbsp; the whole assembled door into the door, check whether </p>
<p>the vertical connecting sheet to nail holes, determine the pin hole on the wall, with the nail connecting piece is fixed on the wall, and the frame and wall slot is inserted in the wood, the frame and the wall firmly connected compacting. 3 installation of door hinge &nbsp; installation of door hinge, hinge on the first screw a screw, check the gap is suitable for closed door and door, check the file is in the same plane, to </p>
<p><br />
<br />
</p>
<p>angle, on both sides of the frame fixed 4 to 6 connecting sheets, strips and lock locked nail foot angle batten, top frame cover on both sides of the above, in the width of the two door should be 7mm frame than the width of the door, the door between the top frame and the inner gear ground height should be 13mm high fan gate. 2 installation frame &nbsp; the whole assembled door into the door, check whether </p>
<p>the vertical connecting sheet to nail holes, determine the pin hole on the wall, with the nail connecting piece is fixed on the wall, and the frame and wall slot is inserted in the wood, the frame and the wall firmly connected compacting. 3 installation of door hinge &nbsp; installation of door hinge, hinge on the first screw a screw, check the gap is suitable for closed door and door, check the file is in the same plane, to </p>
<p><br />
<br />
</p>