<p>sided slotted, installed firmly, the use of hardwood production of the door, should be the first drilling, and then on the screws, strict supervision of construction workers can not directly screw into the screw with a hammer. 4, the installation line to look accurate line to be accurate. The first repair plan should not be too much, the second repair plan to do not stay line do not eat line, repair planing to ensure the quality of installation. The installation of the line can </p>
<p>be with the width of the wall and the door frame, such as the wall than the narrow case, the available side of the line side of the wall, such as the case of the case than the wall on the contrary, the lines can be removed on both sides of the cap , Line with a nail fixed back cover can be. 5, the installation is complete immediately after the production of paint, you should immediately brush once again primer, to prevent the wood moisture deformation. Part4: After </p>
<p>installation carefully to the final acceptance 1, a look at the appearance of smooth coordination requirements of the surface of the wooden paint to smooth, bright, no fall, bubbles, wrinkles, warping and other quality defects, no corrosion, The use of wood and doors should be wood, color coordination, decorative panels and wooden lines can not be large, the same tree species. 2, the two lines to see the vertical vertical line / door or door frame of the </p>
<p><br />
<br />
</p>
