<P>1, before the construction, the need to re-verify with the workers a pre-determined laying direction and methods. Also to open a few packs of the floor, with the workers from the floor to see the color texture changes to determine the random laying, or sub-depth, color and then laying. Can put some of the color is not very beautiful floor laying to the cloakroom, bed and other large pieces of furniture below. I lay the floor when the floor also put some of the floor texture of the floor selected to shop in the aisle, after the shop looks very chic, there are characteristics.</P>
<P>2, the door under the mouth and floor (including the thickness of the door bar) laying the spacing to be maintained at 4 mm or more, to prevent the door after the sun sink, affecting the opening and closing.</P>
<P>3, floor and wall between the expansion joints to ensure that 8-10 mm, otherwise the floor will lose free room for expansion, easy to arch. General floor thickness of 8 mm or more, you can also cut a thick 8-10 mm of wood, as a wooden wedge pressure in the wall as a measure of the expansion of the standard. When installing the skirting board, be sure to remove the wooden wedge placed in the expansion joints, otherwise the expansion joints on the white left. The installed baseboard should cover the expansion joints completely. In order to securely install the baseboard, it is best to nail with nails. After installation, please ask the oil workers to repair nails and seams. Baseboard yin and yang angle should be used 45 degrees diagonal way, will be a lot of beautiful.</P>
