<p>220V/50Hz power supply and water source are provided at the construction site. 2, construction materials flooring: in line with the design and specifications requirements, specifications 600X600. Conductive adhesive: the resistance value shall be less than the resistance value of the panel. Copper foil (or aluminum foil): thickness 0.01-0.05mm, width 20-40mm. Alcohol: Industrial grade. Welding rod: diameter 2~5mm. 3 �� construction tool scraper: used for </p>
<p>coating conductive adhesive. A hammer head: for rubber plastic floor, which fully bonded with the ground. A voltage of 100 volts used to measure electrical conductivity. Professional cutting saw: used for cutting floors. Welding gun: used for welding floor. Other: the laser level meter, bubble level, feet, Moxian, suction plate, nut wrench, ten screwdriver, vacuum cleaner. 4, construction technology (1) seriously check the flatness of the ground, such as found that </p>
<p>does not meet the construction requirements, to Party A's relevant departments. (2) pull the horizontal line, and the height of an elastic wall mounted on the floor to ensure, after laying the floor at the same level; to measure the length and width, and the appropriate choice of laying benchmark position to reduce floor cutting, mounting bracket on the ground up grid lines. (3) adjust the mounting bracket to the desired height and place the support at the cross of the </p>
<p><br />
<br />
</p>
